Jump to content

  2. →
  3. →


Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog

0
- - - - -

Flow Induced Vibration In Shell And Tube Heat Excahnger

Started by 274@P6, Jan 22 2020 11:43 PM
flow induced vibration

2 replies to this topic
Share this topic:
| More

#1 274@P6

274@P6

    Veteran Member

  • Members
  • 43 posts

Posted 22 January 2020 - 11:43 PM

Hi to all,

 

during designing the shell and tube heat exchanger in Aspen EDR, Flow induced vibration appears as warning. how to overcome this.

 

And one more question, warning appears TEMA rhoV2 criteria not accepted. how to rectify this? 


#2 breizh

breizh

    Gold Member

  • Admin
  • 6,939 posts

Posted 23 January 2020 - 07:53 AM

Hi,

Consider to read  these documents to support your work . 

Get support from your supervisor and may be mechanical engineer familiar with S&T HX.

 

https://www.cheresou...hanger-nozzles/

 

Good luck

Breizh 


Edited by breizh, 23 January 2020 - 09:27 PM.

#3 srfish

srfish

    Gold Member

  • ChE Plus Subscriber
  • 408 posts

Posted 04 February 2020 - 11:41 AM

There is a complete book on this topic with the author: Robert D. Blevins.


Back to Process Heat Transfer

Reply to this topic



  

Similar Topics




  1. Cheresources.com Community
  2. → Process Heat Transfer
  3. → Process Heat Transfer
  4. Guidelines / Rules for Posting