Jump to content



Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog

0

Treatment Of Waste Gases Release From The Process Unit


3 replies to this topic
Share this topic:
| More

#1 vaibhav

vaibhav

    Junior Member

  • Members
  • 26 posts

Posted 25 March 2020 - 04:22 AM

Dear members

 

I am working on crude oil topping unit project to increase the Flash point of the Crude from 40 DEG C TO 60  DEG C in flash vessel. please find attached Process flow diagram for the  unit along with stream properties are mentioned there. I had also attached Product data sheet  for ready reference.

 

in this process , waste gases ( Non condensing gases ) will be Generated which needs further treatment. I discussed with end user regarding this. end user instructed that consider suitable measure for the Treatment of the gases in the design except flaring. ( Flaring is not allowed due to local authority regulations)

 

I am requesting to help me in this matter. what are the Other Possible ways/ type fort he Treatment of the waste gases other than flaring.

 

if you require any other Details Please let me know.

 

regards

 

vaibhav

Attached Files



#2 Bobby Strain

Bobby Strain

    Gold Member

  • Members
  • 2,825 posts

Posted 25 March 2020 - 04:12 PM

There is no gas composition given.



#3 vaibhav

vaibhav

    Junior Member

  • Members
  • 26 posts

Posted 25 March 2020 - 11:02 PM

Dear Bobby

 

yes . the gas composition details are not described in the SIMULATION report.  how one can find the gas composition details by running the analysis ?  please find attached Product data sheet and Desired specification for Bottom and Condensate product for more details. the Non condensable gases / heavy gases coming out of the Flash vessel needs to be Treated. suitable measures shall be implemented for the Treatment of the Gases. client is not allowing to do flaring of the gases due to environmental issues. one of the Option that I am thinking is to use this gases as Fuel for firing of the Burner of the Heater unit of hot oil package. Hot oil is  use to increase the Temperature of Feed in the feed heater. I require advice/ suitable measures for  gas treatment.

 

regards

vaibhav

Attached Files



#4 Technical Bard

Technical Bard

    Gold Member

  • ChE Plus Subscriber
  • 399 posts

Posted 30 March 2020 - 05:08 PM

You need to measure it.  You cannot calculate it from the data provided.






Similar Topics