Jump to content

Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog


Dynamic Modeling Of Acid Gas Cleaning Mdea

aspen hysys aspen dynamics acid gas mdea distillation column regenerator

No replies to this topic
Share this topic:
| More

#1 tongyan


    Brand New Member

  • Members
  • 1 posts

Posted 07 July 2020 - 05:19 AM

Hii everyone
Can anyone help me with my problem in HYSYS? I just simulated a regenerator column with acid gas cleaning MDEA amine to regenerate back the lean amine. I


n switching to dynamic mode, HYSYS gave this error: "a possible flipping of the liquid phases has occurred in operation main Reboiler @col2. if a spike or discontinuity has also occurred in your dynamic simulation, it is recommended to change to the user specified primary components method on the phase order tab of the relevant fluid package view"...


After that it gave this error "Negative pressures have been detected!"...could anyone help me with it? I don't know what the problem is?



Similar Topics