6 replies to this topic

[Vibha_101]

What are the rule to be followed while designing spherical or bullet type storage facility for compressed gas?

[Chemitofreak]

Can you be a little more specific about your requirement?

 

a general response:

 

You need to follow the statutory requirement of the country where the sphere/bullet will be installed.

 

For smaller volumes use bullet and larger volumes use sphere. There are countries where the mounded bullet is mandatory for safety reasons and there you do not have any options. The requirements will be specified in the local standards.

[Chemitofreak]

I think there is a criteria for Sphere and Bullet selection in GPSA

[Bobby Strain]

Gas storage is provided only for small volumes. So, what are you storing?

 

Bobby

[Chemitofreak]

Yes...bobby is correct...I thought you need storage for liquefied gas

Edited by Chemitofreak, 16 September 2020 - 11:41 AM.

[FRBChemE]

The design of either one, Sphere or Bullet, is covered by 'the ASME Boiler and Pressure Vessel Code, Section Viii Division !. 

[ChEf]

Try have a look at this.
EEMUA Publication 190 Guide for the design, construction and use of mounded horizontal cylindrical steel vessels for pressurised storage of LPG at ambient temperatures

Edited by Francesco_Chem_Eng, 04 November 2020 - 01:22 AM.