Jump to content



Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog

1

Hysys Dynamic Upset


2 replies to this topic
Share this topic:
| More

#1 Sara77

Sara77

    Brand New Member

  • Members
  • 5 posts

Posted 05 January 2021 - 01:05 PM

Hi everyone, 

 

How can I simulate an upset during a dynamic simulation in Aspe HYSYS? 

I'll explain myself in a better way. I am doing a dynamic simulation and one of my streams is controlled with a flow controller which maintains it at set point. After 1 hour I would like to double the flow of this stream for a short time ( 1 second or 1 minute) to simulate an upset and see the flow controller response. 

I cannot do that by setting and event in the event scheduler and use the specify variable action because Hysys tells me it is not possible to modify the stream flow. 

Are there other ways to to that? 

 

Thank 

Sara 



#2 dattatray kolte

dattatray kolte

    Junior Member

  • Members
  • 17 posts

Posted 06 January 2021 - 02:09 AM

How about having a dummy stream similar to the old one with valve. When you want upset, just open control valve so flow will be double. 


Edited by dattatray kolte, 06 January 2021 - 02:10 AM.


#3 Sara77

Sara77

    Brand New Member

  • Members
  • 5 posts

Posted 06 January 2021 - 03:30 AM

Thank for your suggestion. I'll try that!!

 

Sara 






Similar Topics