Dear all, I am developing a cryogenic distillation column in Aspen Plus and want to go from an equilibrium column to a rate-based for biogas upgrading (biomethane + highly pure CO2 production). My supervisor asked for real data, as he'd be disappointed in just a theoretical discussion, but I cannot find any real designs or pilots that would help a correct dimensioning.
Does anybody have good references or suggestions or knows useful rules of thumb that may help me develop a better simulation?
My reference article is by the research group of Yousef (2019).
Thank you in advance!
|


Cryogenic Separation Of Co2 In Biogas Upgrading - Rate-Based Column De
Started by Zanteh, Mar 14 2021 07:58 PM
1 reply to this topic
Share this topic:
#1
Posted 14 March 2021 - 07:58 PM
#2
Posted 14 March 2021 - 09:48 PM
hi,
Consider this PP presentation to support your work :
https://www.pge.com/...icaAnalysis.pdf
note : in the document you have a list of companies you could contact to support your discussion with your supervisor .
page 7!
good luck
Breizh
Edited by breizh, 14 March 2021 - 09:58 PM.
Similar Topics
Teg Dehydration Stripping ColumnStarted by Guest_SidRah_* , Yesterday, 06:21 AM |
|
![]() |
||
![]() Wet Scrubber Design For Low Flow Rate Of GasStarted by Guest_SIVAMOORTHY_* , 17 Apr 2018 |
|
![]() |
||
Teg Dehydration Stripping Gas Flow RateStarted by Guest_SidRah_* , 20 Aug 2025 |
|
![]() |
||
Hybrid Packed And Tray ColumnStarted by Guest_Zulfise_* , 04 Aug 2025 |
|
![]() |
||
![]() ![]() Design Of Direct Contact After Cooler (Dcac) For Air Separation UnitStarted by Guest_Paulogeorge_* , 29 Jul 2025 |
|
![]() |