Hello everyone,
I was curious if anyone knew of a good formula, equation or method to determine the tank pressure at x amount of seconds after a tank begins being pressurized and vented at the same time. (Pressure accumulation)
Scenario:
Tank being pressurized with N2 while it is being vented on the other end of the tank. Curious about the pressure accumulation after a specific amount of time.
Rough values:
Volume = 3 ft^3
Pressure source = 1,600 psig
Inlet orifice diameter = 1/4"
Vent orifice diameter = 1/4"
Cheers,
Blake
Edited by Blake_51, 05 October 2021 - 02:49 PM.