Hello, which package would you normally use in ASPEN for acids (e.g. H2SO4, acetic acid)
Thanks
|
Posted 08 November 2021 - 05:06 AM
Hello, which package would you normally use in ASPEN for acids (e.g. H2SO4, acetic acid)
Thanks
Posted 08 November 2021 - 06:43 AM
Hi,
I would say NRTL .
take a look at this document .
http://sites.poli.us...rtyPackages.pdf
You may want to ask support from Aspen tech service
Good luck
Breizh
Posted 08 November 2021 - 07:10 AM
Hi,
I would say NRTL .
take a look at this document .
http://sites.poli.us...rtyPackages.pdf
You may want to ask support from Aspen tech service
Good luck
Breizh
Thanks a lot!
Posted 08 November 2021 - 07:12 AM
Concentration can make a difference on which thermo is best. Also, not all acids have similar behavior. Acetic acid forms dimers and hexamers so requires special consideration.
[Correction: Acetic acid does form dimers, but it is hydroflouric acid that also forms hexamers.]
Edited by Pilesar, 09 November 2021 - 03:38 AM.
Posted 09 November 2021 - 01:13 AM
Hi,
you may take a look at these links :
H2SO4
https://inldigitalli...sti/3318169.pdf
CH3COOH
https://www.research...ynamic-property
Good luck
Breizh
Answered
Nitrogen PackageStarted by Guest_Ali4269278331_* , 06 Apr 2024 |
|
|
||
Selecting Property Package For Water And Air Mixture In Aspen Hysys/plStarted by Guest_Sol.Daray_* , 02 Oct 2022 |
|
|
||
Water Dew Point Property Addition In Aspen Plus StreamStarted by Guest_CHEMSTRONG_* , 25 Jun 2022 |
|
|
||
Methylamine Simulation - Physical Property And EosStarted by Guest_Mahdi Malek Alaie_* , 18 Jan 2022 |
|
|
||
Fluid Package For Nitrogen Refrigeration CycleStarted by Guest_JaiEdi_* , 05 Mar 2021 |
|
|