Dear Sir,
What is the maximum Pressure ratio which can be achieved for Centri Compressor practically, what happens to discharge temp when pressure rises in discharge ?
Thanks.
Best Regards,
CHEMSTRONG
|
Posted 07 April 2022 - 06:37 AM
Dear Sir,
What is the maximum Pressure ratio which can be achieved for Centri Compressor practically, what happens to discharge temp when pressure rises in discharge ?
Thanks.
Best Regards,
CHEMSTRONG
Posted 07 April 2022 - 10:16 AM
A centrifugal compressor can have many wheels in series in its casing so pressure ratio can be made very high if client is prepared to pay for it.
Discharge temperature increases as pressure ratio increases. Check your thermodynamics textbook.
Posted 07 April 2022 - 10:48 AM
Dear PingPong Sir,
It is always great to discus with you.
I got your point.
Posted 08 April 2022 - 05:46 AM
Dear PingPong Sir,
Can we have pressure ratio of 3 for Centri compressor ? and temp of discharge as 81 Deg C and suction as 35 DEg C ? and flow is 110 MTPH as with this efficiency value is above 100 percent .
How to analyze given customer data for sensors faults ?
Regards,
CHEMSTRONG
Posted 08 April 2022 - 10:35 PM
Hi,
Consider to study this document , many more are available on this site through their monthly issue.
http://www.jmcampbel...sor-efficiency/
Good luck
Breizh
Posted 24 April 2022 - 02:45 AM
This compressor is probably an oil flooded compressor. It's typical to obtain discharge temperature of 70-80C.
Valves On Low Pressure Steam ServiceStarted by Guest_Ali4269278331_* , 15 Apr 2024 |
|
|
||
Answered
Steam Pressure Requirements For Limpet Batch ReactorStarted by Guest_golegolegole_* , 10 Apr 2024 |
|
|
||
Pressure Control Valve Issues For Gsw LinesStarted by Guest_fahadazh_* , 29 Mar 2024 |
|
|
||
Co2 Removal Membranes Between Compressor StagesStarted by Guest_Sinclc_* , 26 Mar 2024 |
|
|
||
Vapor PressureStarted by Guest_Hamza1111_* , 23 Mar 2024 |
|
|