Greetings,
While mention the 3-phase separator in hysys, how much carryover should i mention?
Is any specification for this carryover like light in heavy phase, heavy in light, gas in light phase?
|
Posted 18 May 2022 - 04:50 AM
Greetings,
While mention the 3-phase separator in hysys, how much carryover should i mention?
Is any specification for this carryover like light in heavy phase, heavy in light, gas in light phase?
Posted 19 May 2022 - 06:25 AM
Phase separators in simulation are usually assumed to be ideal separation for most purposes. Put whatever carryover you need for your specific application to match your process. If you are troubleshooting downstream equipment and want to see what a little liquid in the vapor would look like, then dial some in. Simulators are a tool with a lot of options that may be rarely used.
Posted 06 June 2022 - 04:18 AM
yes, in hysys dynamic simulation mode, for vessel, you can do this, like liquid in gas, gas in liquid, it can be based on feed, product or composition something.
Posted 13 June 2022 - 11:19 AM
Carryover means the liquid leaving in the gas phase. It is specified as a design parameter.
You can find this value by hand according to your process requirements. Later chek on with the simulator, that has to bi given as input data.
Horacio
Posted 14 June 2022 - 04:27 AM
Hi,
Consider to study the material attached .
Breizh
Separator Sizing And Selection, And What Is Slug?Started by Guest_Doneisbetterthenperfect_* , 26 Jan 2024 |
|
|
||
Separator Sizing Step By Step ProcedureStarted by Guest_krishnamurthy_* , 06 Apr 2023 |
|
|
||
Modeling Of A Separator (No Liquid Outlet)Started by Guest_niketas_* , 06 Nov 2023 |
|
|
||
Solvent Carryover Emissions In Absorption ProcessStarted by Guest_TeeEng_* , 24 Oct 2023 |
|
|
||
3-Phase Horizontal SeparatorStarted by Guest_baba ryan_* , 29 Aug 2023 |
|
|