Jump to content



Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog

2

Separator Sizing Step By Step Procedure

separator sizing step by step

9 replies to this topic
Share this topic:
| More

#1 krishnamurthy

krishnamurthy

    Gold Member

  • Members
  • 58 posts

Posted 06 April 2023 - 08:13 AM

Can anyone please share the step by step procedure on how to size the two phase and three phase separator (both horizontal and vertical). I would like to understand clearly. I have read GPSA hand book for the separator sizing , but it is confusing , i could not understand clearly. Please help.



#2 Bobby Strain

Bobby Strain

    Gold Member

  • Members
  • 3,529 posts

Posted 06 April 2023 - 03:27 PM

GPSA is about as plain as it gets. You can look at the API recommended practice, too. You can use software on my website to confirm your understanding. If you register, you can download some stuff, too.

 

Bobby



#3 breizh

breizh

    Gold Member

  • Admin
  • 6,349 posts

Posted 06 April 2023 - 04:28 PM

Hi,

Take a look at those documents.

Breizh



#4 krishnamurthy

krishnamurthy

    Gold Member

  • Members
  • 58 posts

Posted 06 April 2023 - 10:00 PM

Thanks a lot  for the material. 



#5 panagiotis

panagiotis

    Gold Member

  • Members
  • 260 posts

Posted 07 April 2023 - 11:55 AM

Hi do you mind have a similar document for liquid vessel sizing like reflux drum?
Thank you in advance!

#6 breizh

breizh

    Gold Member

  • Admin
  • 6,349 posts

Posted 07 April 2023 - 07:49 PM

Hi panagiotis,

Consider these links to support your work :

https://www.red-bag....-vessel-sizing.html

 

http://web.ist.utl.p...res - Silla.pdf

 

Bibles like Perry and GPSA should offer you more info.

 

Good luck

Breizh



#7 panagiotis

panagiotis

    Gold Member

  • Members
  • 260 posts

Posted 08 April 2023 - 03:28 AM

Thanks Breizh!

#8 Bobby Strain

Bobby Strain

    Gold Member

  • Members
  • 3,529 posts

Posted 08 April 2023 - 04:50 PM

Some of the best information is found at the websites of demister vendors. Check a few. You can find many links at my website. The underlying physics & math is simple. It's the design criteria that is difficult to ascertain. The simplest criteria is found in API 12J. But I don't use this.

 

Bobby


Edited by Bobby Strain, 08 April 2023 - 04:50 PM.


#9 Niveen

Niveen

    Brand New Member

  • Members
  • 1 posts

Posted 14 December 2023 - 05:04 AM

Hi,

Take a look at those documents.

Breizh

 

Where are these document please?

 



#10 breizh

breizh

    Gold Member

  • Admin
  • 6,349 posts

Posted 14 December 2023 - 05:12 AM

Hi,

A few docs.

Note: On top of my recommendations , consider the book referenced underneath:

Gas-liquid and liquid- liquid separators by Maurice Stewart and Ken Arnold -Elsevier

Breizh

Attached Files






Similar Topics