Jump to content



Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog

2

Aspen Hysys Dynamic H2 Tank Temperature Profile


2 replies to this topic
Share this topic:
| More

#1 Rajavelu

Rajavelu

    Brand New Member

  • Members
  • 1 posts

Posted 08 July 2022 - 09:29 AM

Hello, 

 

I tried to simulate H2 tank filling in Aspen dynamics and generated a strip chart where i found the temperature increase inside the H2 high pressure storage tank first increases, then stabilizes and then it starts to decrease. the property package is Grayson streed. 

 

I do not know why there is a decrease in temperature inside the vessel, whereas the mass flow and pressure linearly increase. 

 

Would be helpful to have some responses, 



#2 Pilesar

Pilesar

    Gold Member

  • Members
  • 1,012 posts

Posted 08 July 2022 - 07:13 PM

Most gases cool when they expand. Hydrogen behaves differently in that its temperature increases when it expands.This may be the phenomenon seen in your simulation. Review the Joule-Thomson effect in relation to hydrogen.



#3 Bobby Strain

Bobby Strain

    Gold Member

  • Members
  • 3,277 posts

Posted 09 July 2022 - 02:26 PM

Try another property package. If the supply is at constant pressure, the temperature in the cylinder being filled will always be greater than the source temperature. But it will reduce as the cylinder pressures. Hydrogen doesn't begin to cool on expansion until the source temperature is cold.

 

Bobby






Similar Topics