2 replies to this topic

[StealthProg]

Recently made a few improvements to my hobby simulator.  Will probably make it available for download at some point, on the proviso that constructive feed back would be usefull, i have no doubt there are many bugs still left to be fixed!

Example CDU and preheat train below and column details;

 

 MainScreen.png   190.39KB   0 downloads  ColumnDesigner.png   177.21KB   1 downloads

Edited by StealthProg, 19 October 2022 - 02:54 AM.

[FRBChemE]

There is a fellow in Manaus Brazil with a very good "Hobby" process simulator Perhaps you could use a model  

[StealthProg]

There is a fellow in Manaus Brazil with a very good "Hobby" process simulator Perhaps you could use a model  

Not entirely sure what you mean, if you mean copy a model from DWSIM I have no interest in doing that, all the basic models in my simulator are complete, the column algorithm is unique to my program (and is probably one of, if not the most, robust algrothms available) and any further developement may focus on refinery reactors.  A kinetic Naphtha reforming model is allready complete.