|


Coke Formation On Hydrotreater Catalyst Vs Ccr In Feed
Started by Venkat @89, Jan 16 2023 01:33 PM
2 replies to this topic
Share this topic:
#1
Posted 16 January 2023 - 01:33 PM
Our Diesel Hydrotreater feed is containing CCR 0.01wtppm and Total Aromatics of 31.5%, if CCR of feed is in such low values, indicating coke forming tendencies of feed is very low, then what causes coking on diesel hydrotreating catalysts?
#2
Posted 20 January 2023 - 04:08 AM
You say CCR 0.01 wtppm but surely you mean 0.01 wt%
0.01 wt% is not zero so there will be some coke formation over time.
#3
Posted 20 January 2023 - 05:12 AM
You say CCR 0.01 wtppm but surely you mean 0.01 wt%
0.01 wt% is not zero so there will be some coke formation over time.
My two document of Diesel hydrotreater says CCR as 0.01wtppm in feed, but shall go through other related docs again.
Similar Topics
![]() Dynamic Simulation After Feed Flow ReductionStarted by Guest_Kakashi-01_* , 20 Mar 2025 |
|
![]() |
||
Split The Feed Into Two Identical StreamsStarted by Guest_tomr91_* , 16 Mar 2025 |
|
![]() |
||
Effect Of Continuous Blow Down To Boiler Feed WaterStarted by Guest_Dyames027_* , 21 Nov 2024 |
|
![]() |
||
Coke CalcinationStarted by Guest_rasprocess2026_* , 16 Sep 2024 |
|
![]() |
||
![]() Using Feed Compressor For Start-Up Nitrogen CirculationStarted by Guest_behrouzifar_* , 06 Sep 2024 |
|
![]() |