Pingpong, silesar, silvershaded and other generous contributors, for a conceptual design/estimate, sizing of an ATR(oxygen-blown autothermal reformer) vessel (operated at high pressure close to 40-50 bara) wanted to know is there is any industrial thumbrukle to estimating the catalyst volume an dreactor volume of the ATR vessel, using say the Normal flow rae of the reacting gas mixture(incling NG feed and oxygen) or any such formula. This is needed to guesstimate costs of the ATR vessel. Suppose I have say 1000 Normal m3 of NG+oxygen at ATR inlet at a pressure of 45 bara and with typical exit temperatures(approx. 1000C), are there any heuristics-based thumbrules to quickly size the ATR pressure vessel?
|
0
Typical Design Parameters For Atr Sizing- Help Needed
Started by daraj, Jan 28 2023 06:59 AM
2 replies to this topic
Share this topic:
Similar Topics
Kinetic Parameters Of Primary/secondary ReactionsStarted by Guest_sayoub_* , 12 Mar 2024 |
|
|
||
Sizing Of Vertical/horizontal Flash DrumStarted by Guest_Mohammad3799_* , 10 Mar 2024 |
|
|
||
Design Gauge Pressure Inlet To A Centrifugal Compressor.Started by Guest_Mohammad3799_* , 03 Mar 2024 |
|
|
||
Design Criteria For Sizing Sump Drum Of Close Drain System In Tank FarStarted by Guest_AnbIran_* , 28 Feb 2024 |
|
|
||
Ro SizingStarted by Guest_T_bag_* , 27 Feb 2024 |
|
|