Hello,
I would like to know what are the parameters to take into account for the flare tip design.
is it mandatory to have it?
Does anyone have any documentation or have worked on it before?
Thanks
|
Posted 15 March 2023 - 01:30 AM
Hello,
I would like to know what are the parameters to take into account for the flare tip design.
is it mandatory to have it?
Does anyone have any documentation or have worked on it before?
Thanks
Posted 15 March 2023 - 06:42 AM
Every flare has a tip -- even if it is just a bare end of pipe. I have avoided designing flare tips after seeing bad designs by others. I do not like my designs to fail and that is probably what would happen! Engineered tips are designed for these considerations that I can think of:
1) the tip does not melt or be destroyed by fire 2) air is not allowed to enter the flare system by reverse flow 3) complete combustion with minimal smoke 4) continual combustion with constant flame.
Posted 15 March 2023 - 08:11 AM
Hi,
Consider reading the document attached.
Breizh
Posted 15 March 2023 - 09:55 AM
Hi,
Consider reading the document attached.
Breizh
Thanks breizh,
I would like to know the Windbreaker function.
Could you have documents on it for its sizing
Design And Fabrication Of Reflux DrumStarted by Guest_Femi_* , 22 Apr 2024 |
|
|
||
Jt Based Hcdp Design V/s Mechanical Refrigeration Hcdp Unit.Started by Guest_BabRafiq1_* , 19 Apr 2024 |
|
|
||
Rupture Disc DesignStarted by Guest_chaupradip_* , 13 Apr 2024 |
|
|
||
Falling Film Reactor Design CalculationStarted by Guest_Emranm02_* , 07 Apr 2024 |
|
|
||
Hot Oil Loop / Heating Medium DesignStarted by Guest_Lyne_* , 30 Mar 2024 |
|
|