Hey guys, I've been doing some research on this topic and I would like to ask for your opinion.
I'm wondering if Cu-ETP copper alloy is a good option for pool water treatment using ionization.
The purity of this copper alloy is 99.5%, with the remaining amount being phosphorus and a little bit of oxygen.
I already have an ionization system installed, but now I need to replace the electrodes.
I'm trying to find a better deal by speaking directly with the metal supplier instead of paying over 250 euros for 1.7 kg of copper from the ionization system manufacturer. Which I find very overpriced for 6 copper electrode pieces of 18mm diameter by 100mm long.
As of my research, the most used copper alloys are:
-
85% Cu+15% Zn (brass);
-
99.5% pure copper;
-
94% Cu + 6% Ag;
-
67% Cu + 33% Ag;
Any advice would be greatly appreciated.
Thanks in advance.