I need a guide on how to develop a HAC drawing. A step wise guide will be appreciated.
Thank you.
|
Posted 14 February 2024 - 03:58 AM
I need a guide on how to develop a HAC drawing. A step wise guide will be appreciated.
Thank you.
Posted 14 February 2024 - 04:45 AM
Hi,
Refer to my previous answer in your other thread.
https://www.hse.gov....easareaclas.htm
Check for standards in your country.
Another resource I'm aware of is the GB standards (Chinese standard) where this is well described.
Breizh
Posted 14 February 2024 - 05:08 AM
https://publishing.e...lammable-fluids
https://www.apiwebst...g/standards/500
https://www.apiwebst...g/standards/505
Posted 15 February 2024 - 10:32 AM
Thank you all for your responses. The information provided were quite helpful.
Diked Area Around Distillation ColumnStarted by Guest_hysyshunter_* , 15 Apr 2024 |
|
|
||
Heat Exchanger Wetted Surface Area ReliefStarted by Guest_Xenolithian_* , 22 Sep 2023 |
|
|
||
How To Simulate Heat Exchanger With Same Heat Transfer Area?Started by Guest_Malav_* , 27 Sep 2023 |
|
|
||
Drawing Symbol For Overpressure Protector Valve?Started by Guest_Hankj_* , 02 Aug 2023 |
|
|
||
Too Low Heat Exhange Area?Started by Guest_IngenieroJuan_* , 28 May 2023 |
|
|