Hi Everyone
Does any one knows any reference as design criteria for sizing Sump Drum in tank farm area?
I couldn't find any thing?
Edited by AnbIran, 28 February 2024 - 03:02 AM.
|
Posted 28 February 2024 - 02:40 AM
Hi Everyone
Does any one knows any reference as design criteria for sizing Sump Drum in tank farm area?
I couldn't find any thing?
Edited by AnbIran, 28 February 2024 - 03:02 AM.
Posted 28 February 2024 - 04:44 PM
Define scenarios for liquid inflow to the sump drum, such as:
Based on material balance you get for these cases/scenarios, sizing becomes very much straightforward.
Posted 29 February 2024 - 01:32 AM
Hi Everyone
Does any one knows any reference as design criteria for sizing Sump Drum in tank farm area?
I couldn't find any thing?
Hi,
The sump drum should be sized based on the biggest volume among following incoming fluid scenarios:
-Tank(s) cleaning fluid
-Tank(s) drains below low low liquid level for the purpose of maintenance, repair,...
-Waste incoming fluid during first tank filling, if the tank isn't clean enough
It's obvious, the confined fluid inside the diked area following to an incident (if planned to be conducted to the sump drum) can be managed to be handled part by part through the sump drum based on the selected volume by a.m. sizing criteria...
it's supposed the sump drum content will be evacuated, say by pump, once it's full of liquid fluid...for subsequent processing/disposal...
Posted 29 February 2024 - 04:52 PM
Good points, Fallah.
Tank Blanketing With Natural Gas/ Vapor Recovery SystemStarted by Guest_MethanolPlant_* , Yesterday, 08:17 AM |
|
|
||
Flash Steam Vessel SizingStarted by Guest_JohnFields343_* , 24 Apr 2024 |
|
|
||
Design And Fabrication Of Reflux DrumStarted by Guest_Femi_* , 22 Apr 2024 |
|
|
||
Jt Based Hcdp Design V/s Mechanical Refrigeration Hcdp Unit.Started by Guest_BabRafiq1_* , 19 Apr 2024 |
|
|
||
Rupture Disc DesignStarted by Guest_chaupradip_* , 13 Apr 2024 |
|
|