2 replies to this topic

[Prim]

How to design surface Condenser
Any manual calculation or software or any reference for that

[breizh]

Hi,

Process Heat transfer by D Kern,

Perry's chemical engineer's handbook,

Coulson & Richardson Heat Transfer,

Google also offers calculations and ppt.

Youtube channel offers also tutorial using HTRI sofware

MUCLecture_2024_4140793.pdf

fin_ijprems1749522314.pdf

Design of condenser | PPT

 

CheCalc ‐ Shortcut Heat Exchanger Sizing

Engineering Page > Heat Exchangers, thermal calculators and information

Note: The link below has an option for condenser

On-Line Heat Exchanger Sizing

 

 

Breizh

Attached Files

•  A Heat Transfer Textbook-Fifth Edition-Phlogiston Press-Cambridge-Massachusetts.pdf   28.86MB   1 downloads
•  Condenser-Example_10-4.xls   45.5KB   0 downloads

[Pilesar]

Surface condensers for steam are often very large exchangers. These need to operate with very low pressure drops under high vacuum. If you intend to purchase one, I suggest having it designed by a power plant engineer or an experienced vendor. Properly designed steam surface condensers look quite different from designs for other services. The nozzles and bundle design can be much more complex than petrochemical exchangers. Some considerations: How to get the steam to all the tubes with low pressure drop, how to minimize condensate subcooling, how to vent inert gases continuously while minimizing steam loss. These considerations must be included in the design and cannot easily be fixed later.