Jump to content



Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog

1

Convertor Performance For Sulphuric Acid Generation


1 reply to this topic
Share this topic:
| More

#1 Ranga v

Ranga v

    Veteran Member

  • Members
  • 33 posts

Posted 01 June 2026 - 02:49 AM

Dear Forum Members :

 

SO3 is produced by conversion of the So2 to So3 in a convertor. DP for the 1 st and 4th beds has observed to have increased from the normal values to max limits .Is their a tool to predict the balance service period of operation based on DP. flow has been reduced by 20 % of cap.



#2 carlos infante

carlos infante

    Junior Member

  • Members
  • 28 posts

Posted Today, 10:57 AM

The H2SO4 process unit has a four-year general turnaround cycle during which the catalyst beds are reviewed. The first bed contains a layer of fine balls to trap particulates from the gas feed, which otherwise increase the pressure drop across the bed.

 

Since there is no predictive tool available, plant records remain the best resource for monitoring performance.

 

carlos






Similar Topics