Jump to content

  2. →
  3. →


Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog

Two Phase Line Sizing In Si Unit

Started by Dtan76, Jan 10 2007 06:23 AM

This topic has been archived. This means that you cannot reply to this topic.
17 replies to this topic
Share this topic:
| More

#1 Dtan76

Dtan76

    Gold Member

  • Members
  • 89 posts

Posted 10 January 2007 - 06:23 AM

Dear all

I had download the 2-phase line sizing & pressure drop calc from RiverCityEng.com, but the default input data is in English unit. I was wondering anoyone can share similar spreadsheet in Metric unit (at least all calc & input info is SI unit)

Thanks alot

Regards

#2 Profe

Profe

    Gold Member

  • ChE Plus Subscriber
  • 316 posts

Posted 16 January 2007 - 02:48 PM

Hi Dtan76

Attached you find two excel files about this subject.
And a PDF file about two phase flow

I think that be useful.

Good luck.

#3 JoeWong

JoeWong

    Gold Member

  • ChE Plus Subscriber
  • 1,223 posts

Posted 28 January 2007 - 11:04 PM

Hi Mr. Profe,

I am a process engineer in Oil & Gas EPC firm. If you don't mind, i would like to have a copy of your excel files pdf. My email address is webwormcpt.wwcpt@gmail.com.

Thanks in advance.

Best regards,

JoeWong

#4 Dtan76

Dtan76

    Gold Member

  • Members
  • 89 posts

Posted 30 January 2007 - 09:22 PM

Hi Joe Wong

Check your mailbox, I think you should received my attachments.

Regards
DTan

#5 JoeWong

JoeWong

    Gold Member

  • ChE Plus Subscriber
  • 1,223 posts

Posted 31 January 2007 - 03:44 AM

DTan,
Thanks for your attachments.

best regards,

JoeWong

#6 benoyjohn

benoyjohn

    Gold Member

  • Members
  • 70 posts

Posted 01 February 2007 - 06:10 AM

Hi Profe,

Can you please send me the pdf and excel files.

My id is benoyjohn@yahoo.com

Thanks and regards
Benoy John

#7 djack77494

djack77494

    Gold Member

  • ChE Plus Subscriber
  • 1,282 posts

Posted 01 February 2007 - 03:35 PM

Profe,

May I suggest that you just upload the files and then anyone interested may have access. It's pretty easy to do, and there are instruction included at the top of the forums.

Thanks,
Doug

#8 JoeWong

JoeWong

    Gold Member

  • ChE Plus Subscriber
  • 1,223 posts

Posted 01 February 2007 - 09:43 PM

May I call OUR RESPECTED PEOPLES who willing to share their INFORMATION upload thier files for the interest of our community...

This definitely will save time, resources, space, etc of EVERYONE...

Thanks and great appreciation to OUR RESPECTED PEOPLES

#9 Guest_kwade_*

Guest_kwade_*
  • guestGuests

Posted 05 February 2007 - 08:33 AM

The software from Neotec (www.neotec.com) has a unique pay-as-you-use option that may be useful for this type of application. It also takes into account temperatures changes.

#10 Profe

Profe

    Gold Member

  • ChE Plus Subscriber
  • 316 posts

Posted 05 February 2007 - 06:17 PM

Hi JoeWong

I put above the attachments again for the people interested on this subject.

Good luck.

#11 JoeWong

JoeWong

    Gold Member

  • ChE Plus Subscriber
  • 1,223 posts

Posted 05 February 2007 - 08:23 PM

Hi Profe,

Please receive my sincere apreciation...

Thanks and appreciate.

On Behalf of
all peoples interested on this subject

#12 suresh2

suresh2

    Junior Member

  • Members
  • 24 posts

Posted 04 March 2007 - 09:37 AM

Please find attached the Spreadsheet for 2-phase flow pressure drop calcuations in Metric units. I found my spreadsheet has already been distributed but i added some notes towards using the spreadsheet.

Please let me know if anything has to be changed.

Suresh Reddy Asi

Attached Files


#13 ankur2061

ankur2061

    Gold Member

  • Forum Moderator
  • 2,484 posts

Posted 25 June 2008 - 02:19 PM

Hello,

Can you send these files at ankur_2061@hotmail.com

Regards,
Ankur.

#14 Qalander (Chem)

Qalander (Chem)

    Gold Member

  • ChE Plus Subscriber
  • 829 posts

Posted 27 June 2008 - 01:48 AM

QUOTE (Profe @ Jan 16 2007, 02:48 PM) <{POST_SNAPBACK}>
Hi Dtan76

Attached you find two excel files about this subject.
And a PDF file about two phase flow

I think that be useful.

Good luck.

Dear Profe Hello& Good afternoon,
It is appreciable in advance if the U/signed is emailed referred articles at smwasialavi@gmail.com
Qalander

#15 renin

renin

    Junior Member

  • Members
  • 17 posts

Posted 12 April 2010 - 06:12 AM

i will be very glad too if i can have the pdf file.

my addy is tinkypearl@yahoo.com

#16 SARFRAZ ALI

SARFRAZ ALI

    Brand New Member

  • Members
  • 3 posts

Posted 18 April 2010 - 06:54 AM

I can't see PDF file regarding two phase line sizing. Please send it to me at engrsarfraz@yahoo.com

#17 humi

humi

    Brand New Member

  • Members
  • 3 posts

Posted 28 July 2010 - 02:12 PM

can u plz mail me those excel files regarding line sizing???

my id is humaira88@hotmail.com.

thanks.....

#18 Zauberberg

Zauberberg

    Gold Member

  • ChE Plus Subscriber
  • 2,728 posts

Posted 29 July 2010 - 10:51 AM

The files you are looking for are:

http://www.rivercity...P2000-v1.07.xls
http://www.rivercity...-Calc2Phase.pdf

And another one from ChE website: http://www.cheresour...om/twophase.xls
Back to ChE Plus Forum

Similar Topics




  1. Cheresources.com Community
  2. → ChE Plus Forum
  3. → ChE Plus Forum
  4. Guidelines / Rules for Posting