43 replies to this topic

[manizheh]

Dear all,

Can I ask you to upload the K.O drum sizing excel calculation sheet?

Thanks for your great help
Regards
Manizheh

[Art Montemayor]

Manizheh:

Please be specific about what you mean. What/which specific K.O drum sizing excel calculation sheet do you mean? Is there one in particular that you are referring to? If so, give us a hint or a reference as to who should be "uploading" the subject document.

Is a particular thread or Forum related to this calculation sheet? We can't help if we don't get direction.

[jprocess]

Hello,
If you send me your e-mail address and company name I can send you valuable stuff regarding to k.o.drum sizing.
Cheers.

[manizheh]

Dear Sir,

Sorry for my bad discussion.I need to size a knock out drum for flare system.The reference is API 521,but API recommends a very long trail and error method.I meant if anybody has a calculation sheet in excel format to fill in just some data to get result it will be useful for me.I've checked free calc,addressed in CHERESOURCE but there is no item for flare system K.O drum.

Thanks

[jprocess]

I belive you should first read that procedure to get the concept of ko drum sizing.Because if you do not know about the concept no program like excel sheets can solve your problem.
I have developed some excel sheets regarding to phase separators sizing(both horizintal & vertical).
In general flare ko drums are horizontal.One important point is that we usually do not consider demister pad for flare ko drums.
Cheers.

[asade abiodun]

JProcess,

I would appreciate you sending me the valuable information regarding KO drum sizing. My email address: abiodun.a@atlasengineering-ng.com.

Thanks

[oomme]

JProcess,

Please send me a copy of your spreadsheet.

My email address is obioma.osuoha@impac-nigeria.com. You can also copy me on obiomac@yahoo.com.

I appreciate.

Obioma.

[kranthi]

Hi can you plz send the excel spread sheet of K.O drum and related information to my e-mail id

kranthi.chunduri@woodgroup.com

Regards
Kranthi

[rocky]

hi, pls send it to me also..

ID- rahuldave20@yahoo.co.in

[jetul]

JProcess,

I would appreciate you sending me the valuable information regarding KO drum sizing. My email address:

jetul@rediffmail.com

Many thanks and regards

Hi all

This is my first time here, so I am not sure how you guys work. I am currently sizing a knock out drum with a demister pad and i saw that someone has a spreadsheet for these calculations. Can you please forward it to me so that i can compare it with mine.

Thank you in advance

[wnovaes]

Jprocess,

Please, could you e-mail me a copy of your spreadsheet for KO drum sizing.

Thanks in advance and best regards,
WSN.

hi,

pls send it to me also..

yaser_lj@yahoo.com

or

upload it in your POST!

Tanx

[smart]

please mail me too at
funky_ali82@hotmail.com

thank you

[Tebzah]

Can sir/madam please send me Drum sizing procedures and the worksheet

my email is...... tebzah@hotmail.com

thanx in advance!!

[benabed]

Jprocess;

Actualy i am dealing the with redesign of a compressor discharge KO drum which is carring over. It will be a great help to me if you would send me a copy of your excel sheets regarding separators sizing in order to check the original design. Thank you in advance.

[Nellore Suresh Kumar]

would appreciate you sending me the valuable information regarding KO drum sizing.
My email address: nelloresureshkumar@gmail.com

[gboyega01]

Hi Art,

I would be glad if you can send me too the spreadsheet on knockout drum and thanks for your assistance on the forum so far, some of us do appreciate your technical generosity.

My mail add is agboyega@technip.com or gboyega01@gmail.com

Thanks

May I too have a copy of your 'knockout drum sizing' spreadsheet. My email address is kjmcspadden@cox.net. Thank you in advance.

[Srikrishna Chaitanya]

Dear manizheh
can you please send the Knock Out drum sizing calculation . My mail ID is satishbabu_garikapati@lntenc.com
thanks in advance

Regards,
Satish

[hant104]

please mail me too at hant104@gmail.com
Thanks a lot

[AFFAN]

really amzing a demister pad in knock out drum?, do u mean a steam drum,
plz let me know if there is any sheet available for KO drum sizing

asadiq@descon.com.pk

[Alemian]

I would appreciate you sending me the valuable information regarding KO drum sizing. My email address: farshid.alemian@gmail.com

[Rsam]

Hello,

I am looking for designing a KO pot for CO2 /Water separator in my CO2 removal of Ammonia plant. (SAFCO saudi) Could you please send me the stuff

RSam
ramanswami@gmail.com