Dear Friends,
Is there any website or e-book which deals with the topic "Commissioning Department Handing over to Operation Department" . Is there any standard procedure to be followed before Handing over a process plant to Operation department.
If my question is not clear , please feel free to ask me again.
with kind regards,
chemwiz
|
Question On Commissioning People Handing Over To Operation People
Started by chemwiz, May 06 2007 05:23 AM
2 replies to this topic
Share this topic:
#1
Posted 06 May 2007 - 05:23 AM
#2
Posted 21 June 2007 - 01:00 AM
Dear friend,
You are asking a simple solution for a series of answers.
First the entire system to be divided in to subsystem, Basic function and associated functions.
Normally the mechanical completion checklist (with catagory A,B and C) to be prepared first before proceed to precommissioning activities. Precommissioning activities involves conformity checks, Pipeline flushing (Hydrotest is part of construction activities), static test/deenergised checks to be carried out.
Dynamic/Live test like function logics, simulation tests , Solo run test for the electrical drives to be done before starting actual commissioning ie., allowing the medium in to the system. Finally the system to be run idividually to observe its normal function. Performance test and acceptance test come as last before the system is handed over to Operation department.
Win PCS and Opercom/ICAPS (by Total) are most common methodologies followed in industries for Engineering for commissioning .
S.Chittibabu
#3
Posted 22 June 2007 - 05:28 PM
Hi chemwiz
About your question related to commissionig plants, attached you will find a pdf file.
Download it and look at 24 page you find that information.
Otherwise, try at: http://www.deir.qld....ctors/index.htm
the site that I downloaded the attached file
Good luck in your searching.
About your question related to commissionig plants, attached you will find a pdf file.
Download it and look at 24 page you find that information.
Otherwise, try at: http://www.deir.qld....ctors/index.htm
the site that I downloaded the attached file
Good luck in your searching.
Similar Topics
General Balance Of Energy On Compressors, QuestionStarted by Guest_MumtazDogan_* , 29 Apr 2024 |
|
|
||
Epc Basic QuestionStarted by Guest_poojabathula369@gmail.com_* , 24 Apr 2024 |
|
|
||
Overpressure Scenario QuestionStarted by Guest_panagiotis_* , 08 Mar 2024 |
|
|
||
Operation Of Heat Exchanger Above The Overall Heat Transfer CoefficienStarted by Guest_Papps_* , 13 Jan 2024 |
|
|
||
Falling Film Evaporator Basic QuestionStarted by Guest_panagiotis_* , 13 Mar 2023 |
|
|