Hello,
I'm safety engineer and I'm working on an offshore project.
I would like to have some informations concerning the technology of the fusible plug loop used in our platfotm. It is seems that fusible plug loop pressurised by instrument air is an old technology. Our client recommends to use heat-sensitive cable in which a fire melts the insulation and shorts out the cables indise. I never hear this technology. Does anybody know this technology ?
Astrid
|
Fusible Plug Loop Technology
Started by , Jul 19 2007 04:23 AM
3 replies to this topic
Share this topic:
#1
Posted 19 July 2007 - 04:23 AM
#2
Posted 21 July 2007 - 10:17 AM
In offshore production platforms, as far as Fire & Gas detection systems are concerned, many of the times you get spurious alarms. May be due to faulty electronic cards/ detectors etc for gas/H2S detection. But in case of fusible plug loops, unless the plug or tubing corrodes or plug develops pin hole leakage, the system functions wells and activates Fire shut down only when necessary.
Further, trouble shooting in case of fusible plug system is not that difficult.
I really do not know about the heat sensitive cable system. and how easy to trouble shoot it due to shorting of cables due to spurious reasons. It is generally observed that quick normalization of production is a prime consideration in offshore production facilities.
Further, trouble shooting in case of fusible plug system is not that difficult.
I really do not know about the heat sensitive cable system. and how easy to trouble shoot it due to shorting of cables due to spurious reasons. It is generally observed that quick normalization of production is a prime consideration in offshore production facilities.
#3
Posted 25 September 2008 - 06:42 AM
QUOTE (Astrid @ Jul 19 2007, 12:23 PM) <{POST_SNAPBACK}>
Hello,
I'm safety engineer and I'm working on an offshore project.
I would like to have some informations concerning the technology of the fusible plug loop used in our platfotm. It is seems that fusible plug loop pressurised by instrument air is an old technology. Our client recommends to use heat-sensitive cable in which a fire melts the insulation and shorts out the cables indise. I never hear this technology. Does anybody know this technology ?
Astrid
I'm safety engineer and I'm working on an offshore project.
I would like to have some informations concerning the technology of the fusible plug loop used in our platfotm. It is seems that fusible plug loop pressurised by instrument air is an old technology. Our client recommends to use heat-sensitive cable in which a fire melts the insulation and shorts out the cables indise. I never hear this technology. Does anybody know this technology ?
Astrid
I have to offer Fire detection using fuseable plugs. Can someone provide me the source to buy and get design assistance to proceed with.
I need urgent help please.
Alexander
#4
Posted 18 May 2010 - 09:18 AM
I have to offer Fire detection using fuseable plugs. Can someone provide me the source to buy and get design assistance to proceed with.
I need urgent help please.
Alexander
Please contact me if you need fusible plugs in the future.
http://www.sinomas.com
Similar Topics
Hot Oil Loop / Heating Medium DesignStarted by Guest_Lyne_* , 30 Mar 2024 |
|
|
||
Plug Flow Vs CstrStarted by Guest_titanif_* , 25 Oct 2023 |
|
|
||
Hydrocarbon Dew Point Control Using Propane Refrigeration Loop.Started by Guest_BabRafiq1_* , 10 Jul 2023 |
|
|
||
Proper Read Of A Simple Temperature Control LoopStarted by Guest_panagiotis_* , 01 May 2023 |
|
|
||
Reciprocating Compressor Protection - Sil LoopStarted by Guest_seuenergy_* , 10 Mar 2023 |
|
|