hi friend..
i need ur help
nowadays im doing my project about plug flow reactor with recycle simulated in hysys 3.1. i have 4 reactions (the process condition is in 25oC and 1 atm):
hcho + 1/2 o2 ----- hcooh ------ co + h2o
2hcho ------- hcooch3
hcooch3 + h2o ------- ch3oh + hcooh
when i already simulated it to hysys, something has happened.
1. the conversion only happened for 1st and 2nd reaction, for the 3rd and 4th reaction doesnt have a conversion.
2. when i ignored it, and i turned it to dynamic, hysys asking for K value (if im not mistake, K value is pressure flow), what is that mean?
what i want to ask u are:
1. how can i get the 3rd and 4th conversion? did i fill a wrong data?
what is K value and how i can get it?
i hope all of u can help me
best regards
myins
|
[ask]plugflow Reactor On Hysys
Started by myins, Sep 24 2007 11:47 PM
No replies to this topic
Share this topic:
#1
Posted 24 September 2007 - 11:47 PM
Similar Topics
Aspen Hysys - Creating A New Component And Defining PropertiesStarted by Guest_catiiiii_* , 22 Apr 2024 |
|
|
||
Answered
Steam Pressure Requirements For Limpet Batch ReactorStarted by Guest_golegolegole_* , 10 Apr 2024 |
|
|
||
How To Find K-Values Of A Hydrocarbon Mixture On Aspen Hysys?Started by Guest_Alexis Azamar_* , 08 Apr 2024 |
|
|
||
Falling Film Reactor Design CalculationStarted by Guest_Emranm02_* , 07 Apr 2024 |
|
|
||
Falling Film Sulfonating ReactorStarted by Guest_Emranm02_* , 07 Apr 2024 |
|
|