condensate water make up system,
Condensate water storage tank(located at 100m elevn reference & normal water level 108m) of 300 m3 open to atmosphere is feeding hotwell at 107m elevn through hotwell make up pumps (centre line 100.2m) & make up CVs.
Frictional losses at operating flow
suction pipe=0.1mwc
discharge pipe=25mwc
other losses=5 mwc
1.In design of these systems what is the minimum level to be maintained in CST to prevent vortexing & loss in condenser vacuume.
2. what are the design inherent features given to prevent loss of vacuume in condenser in case of nontripping of pumps on very low level.
Sorry i could not attach the excel sheet, as it was showing error.
regards
|
![](https://secure.gravatar.com/avatar/b0de25453815a45d7e84949796395fb6?s=100&d=https%3A%2F%2Fwww.cheresources.com%2Finvision%2Fpublic%2Fstyle_images%2Fmaster%2Fprofile%2Fdefault_large.png)
Condensate Make Up System
Started by rsk, Jul 16 2008 12:27 PM
1 reply to this topic
Share this topic:
Similar Topics
![]() Control SystemStarted by Guest_Lyne_* , 03 May 2024 |
|
![]() |
||
![]() Condensate Storage Tanks In-Breathing And Out-BreathingStarted by Guest_MethanolPlant_* , 26 Apr 2024 |
|
![]() |
||
Tank Blanketing With Natural Gas/ Vapor Recovery SystemStarted by Guest_MethanolPlant_* , 26 Apr 2024 |
|
![]() |
||
Handling The Limited Capacity Of Flare SystemStarted by Guest__1angelia23_* , 05 Apr 2024 |
|
![]() |
||
![]() Closed Drain SystemStarted by Guest_Falah_* , 26 Mar 2024 |
|
![]() |