Jump to content



Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog

How To Calculate The Mixed Viscosity Of The Crude Oil


This topic has been archived. This means that you cannot reply to this topic.
4 replies to this topic
Share this topic:
| More

#1 dhns

dhns

    Gold Member

  • Members
  • 65 posts

Posted 24 July 2008 - 08:46 AM

Dear all,

any one can give information about mixed viscosity of the
crude oil along with the water

or if gas is present along with that mixture is there any changes would happen?
in mixture viscosity

regards,
dhns.

#2 joker1

joker1

    Junior Member

  • ChE Plus Subscriber
  • 11 posts

Posted 27 July 2008 - 12:35 PM

The viscosity of a liquid mixed with another (immiscible) one or with a solid (slurry) increases with the volume phase fraction irrespective of the viscosity or nature of the 2nd.
At first approximation the ratio of the mixture viscosity to that of the pure primary fluid is:
mu (mix)/ mu (primary)= 1 +2.5 * vol. fraction
This is the Einstein eq.
Other researchers have refined this equation with additional terms.

#3 JoeWong

JoeWong

    Gold Member

  • ChE Plus Subscriber
  • 1,223 posts

Posted 28 July 2008 - 03:39 AM

dhns,
This article may provides some clue.

VISCOSITY

Look for "Viscosity of blends of liquids"

HTH

#4 Andree

Andree

    Gold Member

  • Members
  • 140 posts

Posted 28 July 2008 - 09:36 AM

QUOTE (joker1 @ Jul 27 2008, 06:35 PM) <{POST_SNAPBACK}>
The viscosity of a liquid mixed with another (immiscible) one or with a solid (slurry) increases with the volume phase fraction irrespective of the viscosity or nature of the 2nd.
At first approximation the ratio of the mixture viscosity to that of the pure primary fluid is:
mu (mix)/ mu (primary)= 1 +2.5 * vol. fraction
This is the Einstein eq.
Other researchers have refined this equation with additional terms.


but this applies to suspansion of solids and not liquid/liquid dispersions (emulsions)

#5 Andree

Andree

    Gold Member

  • Members
  • 140 posts

Posted 29 July 2008 - 02:55 AM

QUOTE (JoeWong @ Jul 28 2008, 09:39 AM) <{POST_SNAPBACK}>
dhns,
This article may provides some clue.

VISCOSITY

Look for "Viscosity of blends of liquids"

HTH



or search Ishii-Zuber drag model




Similar Topics