In HTRI I am not able to offset the tube side inlet & outlet nozzles (say by 45 degree) . It is always taking in radial center . Please help
|
Help Regarding Htri
Started by ayan_dg, Feb 18 2009 05:22 AM
1 reply to this topic
Share this topic:
#1
Posted 18 February 2009 - 05:22 AM
#2
Posted 24 February 2009 - 07:51 AM
Go to inputsummary->geometry->nozzle location. You can change nozzle location but only three option available. radial, axial and axial with distributor.
that's all i think which software can offer the facility as far as the location of nozzles are concern, for any other case you have to change nozzle location in GA drawing as per your requirement with judgement of enfluence of this change in performance.
that's all i think which software can offer the facility as far as the location of nozzles are concern, for any other case you have to change nozzle location in GA drawing as per your requirement with judgement of enfluence of this change in performance.
Similar Topics
Htri SimulationStarted by Guest_Santoso13_* , 12 Mar 2023 |
|
|
||
Pct Tube Removed Result In HtriStarted by Guest_cincao_* , 29 Oct 2022 |
|
|
||
Overdesign In Htri Simulation ModeStarted by Guest_Aref-Gh_* , 26 Jan 2022 |
|
|
||
Shell And Tube Heat Exchanger In HtriStarted by Guest_Sanjayr126_* , 28 Sep 2021 |
|
|
||
Htri Warning Message: "the Maximum Process Temperature Is OutsideStarted by Guest_Nha Uyen_* , 03 Jun 2021 |
|
|