Hi all
do you have any idea what's the different between rectangular & circular impingement plate? is it something to do with efficiency of distributing shell side flow?
Thanks.
|
Impingement Plate
Started by fatimah, Jan 20 2010 04:16 AM
1 reply to this topic
Share this topic:
#1
Posted 20 January 2010 - 04:16 AM
#2 Guest_majster_*
Posted 22 January 2010 - 01:23 PM
Hi,
as far as I know, main pourpose of impigment plate is not flow distribution but protection of heat exchanger tubes from erosion. If haeting meduim is saturated steam for example, it contains condensate droplets, which are very erosive. So in this aspect I see no difference between circular or rectangular impigment plate. You can find procedure for sizing impigment plate in literature-Waermeatlas for example (here is for rectangular plate only). I would guess that rectangular plate is more standard (also if you search for sizing methods) and it is easier to make (it is cut by laser, bent to make support and weldet to vessel).
I hope this is of some help.
Best regards
as far as I know, main pourpose of impigment plate is not flow distribution but protection of heat exchanger tubes from erosion. If haeting meduim is saturated steam for example, it contains condensate droplets, which are very erosive. So in this aspect I see no difference between circular or rectangular impigment plate. You can find procedure for sizing impigment plate in literature-Waermeatlas for example (here is for rectangular plate only). I would guess that rectangular plate is more standard (also if you search for sizing methods) and it is easier to make (it is cut by laser, bent to make support and weldet to vessel).
I hope this is of some help.
Best regards
Similar Topics
Plate Fin Heat ExchangerStarted by Guest_shazzad1613_* , 23 Mar 2024 |
|
|
||
Low Pressure Air Flows Thru Orifice Meter Plate QuestionStarted by Guest_sfhh_* , 24 Feb 2023 |
|
|
||
Orifice Plate Measuring Flow Away From Calculated Value!Started by Guest_Fatema1987_* , 08 Mar 2022 |
|
|
||
Discharge From Tank Against A Flat PlateStarted by Guest_raju.kct_* , 26 Jul 2021 |
|
|
||
Temperature Difference In Plate-Fin ExchangeStarted by Guest_Ghasem.Bashiri_* , 03 Feb 2021 |
|
|