what should be the voptium value of L/G for flow in a wet induced draught cooling tower?i ve heard it should lie between 1 and 1.1.is it true?please clarify.
|
L/g Value In A Cooling Tower
Started by shiny, Mar 08 2008 06:01 AM
1 reply to this topic
Share this topic:
#1
Posted 08 March 2008 - 06:01 AM
#2
Posted 11 March 2008 - 02:48 PM
QUOTE (shiny @ Mar 8 2008, 04:01 PM) <{POST_SNAPBACK}>
what should be the voptium value of L/G for flow in a wet induced draught cooling tower?i ve heard it should lie between 1 and 1.1.is it true?please clarify.
L/G ratio in cooling tower design effects the tower in tow ways .i-e. Height of tower and fan power
If we increase the L/G ratio the fan power required will increase and height of tower decrase and vise versa for decrease in L/G ratio. Now you have to optimaize between operating cost and installation cost ..
for quick estimate of L/G ratio ..... Look Perry's hand book of chemical engineering there .. Optimum heights of coolinh towers are given for several ranges and approches select such a L/G ratio that your height of cooling tower falls in between the optimum limista disscused in perry... hope this helps you out
Similar Topics
Chiller Efficiency Dependence On Cooling Water TemperatureStarted by Guest_Neha Vensiyani_* , 29 Apr 2024 |
|
|
||
Minimum Tower DiameterStarted by Guest_AnbIran_* , 17 Nov 2023 |
|
|
||
Sizing Of Cooling Water Pipe LineStarted by Guest_Asif Azeez_* , 08 Jan 2021 |
|
|
||
Heating And Cooling Circuit DesignStarted by Guest_AAZIZ_* , 20 Jan 2024 |
|
|
||
How To Calculate Cooling Rate Of CrystallizerStarted by Guest_snehchem_* , 04 Jan 2024 |
|
|