In our plant we have a direct contact air cooler,where air at a temperature of 35 degc is cooled by chilled water(temp 13 degc) to a temperature of 15 degc.Now I have received several vendor offers reagarding this cooler..
I dont have any software for checking the packed bed hydraulics calcln..So how can I check whether the packed bed height offered by them is sufficient?I have only checked the heat balance till now...
Can u help me with any sort of spreadsheet or boooks,from where I can verify the packing height?
Thnxxx in advance...
|
Offer Of Direct Contact Air Cooler
Started by A mukherjee, Aug 17 2010 12:00 PM
2 replies to this topic
Share this topic:
#1
Posted 17 August 2010 - 12:00 PM
#2
Posted 18 August 2010 - 02:54 AM
Mukherjee,
Two useful links for packed columns:
http://www.chemsof.com/spreadsheet.htm
http://www.cheresour.../software.shtml
Regards,
Ankur.
Two useful links for packed columns:
http://www.chemsof.com/spreadsheet.htm
http://www.cheresour.../software.shtml
Regards,
Ankur.
#3
Posted 18 August 2010 - 11:08 AM
Thnxx a lot Ankur..But can u tell me any method by which I can verify the packed bed is sufficient for heat transfer ?
Similar Topics
Air-Cooler Heat Exchanger - Unit Vs BayStarted by Guest_pymorty_* , 19 Dec 2023 |
|
|
||
Dry Cooler Vs Cooling TowerStarted by Guest_Quimarah_* , 10 Sep 2023 |
|
|
||
Heat Loss Of Direct Steam Injection In A VesselStarted by Guest_jess1203_* , 23 Feb 2023 |
|
|
||
Air Cooler Fan ShutdownStarted by Guest_A.D._* , 13 Oct 2021 |
|
|
||
One Air Cooler Instead Of TwoStarted by Guest_Movers_* , 30 Sep 2021 |
|
|