A brand new screw type vacuum pump has arrived in one of our plant .The pump was taken a trial and the shut off pressure of 1Torr is achieved.
The problem started within few hours ,when it was taken in-line to the process.The pump tends to trip automatically and it gets started only after continuous flushing with solvent.The pump requires solvent flush of about 25 l/hr .
What could be the reason for the pump trip?
And also it is noticed that when ever there is a auto flush in the system the vacuum tends to fluctuate.
Pl help me dealing with this
Regards,
Nambiar
|
Screw Type Vacuum Pump Tripping Problem
Started by atc, Sep 13 2010 12:57 AM
1 reply to this topic
Share this topic:
Similar Topics
Buffer Tank Sizing Upstream Screw CompressorStarted by Guest_Process_1601_* , Yesterday, 11:41 AM |
|
|
||
Turbine Driven PumpStarted by Guest_Rahimzadeh_* , 27 Apr 2024 |
|
|
||
Vacuum Pump Power EquationStarted by Guest_hysyshunter_* , 22 Apr 2024 |
|
|
||
Heavy Crude PumpStarted by Guest_Rahimzadeh_* , 13 Apr 2024 |
|
|
||
Pump Sizing ConsiderationsStarted by Guest_panagiotis_* , 07 Apr 2024 |
|
|