|
The Production Styrene By Catalytic Dehydrogenation Of Ethylbenzene Pl
Started by sndlovu, Nov 05 2011 02:12 AM
2 replies to this topic
Share this topic:
#1
Posted 05 November 2011 - 02:12 AM
Hi guys, please help with the plant design project for the adiabatic dehydrogenation of Ethylbenzen, the mass balance especially
#2
Posted 06 November 2011 - 09:20 AM
Tell us what you have done so far .Nobody will do your homework.
Hope you understand
Breizh
Hope you understand
Breizh
#3
Posted 20 November 2011 - 09:50 AM
Hi,
I am doing the exact same project (different country to our friend), I was wondering could you tell me the typical pressure to heat atm steam to 650 0C in a superheater. My chosen process is Lummus SMART with some of my twicks. This is for the energy balance.
Also If I upload my Material balance would anyone be able to have a look at it and point out any errors, if any. (lots of assumptions!)
Thank yous in advance
I am doing the exact same project (different country to our friend), I was wondering could you tell me the typical pressure to heat atm steam to 650 0C in a superheater. My chosen process is Lummus SMART with some of my twicks. This is for the energy balance.
Also If I upload my Material balance would anyone be able to have a look at it and point out any errors, if any. (lots of assumptions!)
Thank yous in advance
Similar Topics
Methanol ProductionStarted by Guest_Manue_* , 21 Mar 2024 |
|
|
||
Linear Alkyl Benzene Sulfonic Acid Production (Labsa) SimulationStarted by Guest_Emranm02_* , 03 Mar 2024 |
|
|
||
Reactive Distillation For Dimethyl Carbonate ProductionStarted by Guest_JakeHollier_* , 02 Mar 2024 |
|
|
||
Oil Production And Desalting UnitStarted by Guest_Ali4269278331_* , 25 Feb 2024 |
|
|
||
Sulfuric Acid Production / Partial Pressure Of H2So4Started by Guest_Jon K_* , 22 Sep 2023 |
|
|