Question: How can i do Fire water Demand Hydraulic Calculation (steady state) for an unmanned platform?
Condition: There are no deluge system. No Fire Pump on the platform. Only 2 hydrants located on each deck (4 decks). The only source of fire water is the sea water during fire fighting which would be pumped out from the attending vessel to the header.
|

Fire Water Demand Hydraulic Calculation (Steady State)
Started by aespulgar, May 05 2012 02:57 AM
fire water demand
1 reply to this topic
Share this topic:
#1
Posted 05 May 2012 - 02:57 AM
#2
Posted 07 May 2012 - 04:53 AM
aespulgar,
Following references may be utilized for fire water hydraulic calculations:
Chapter 7 - Design Objectives, Chapter 8 -Plans & Hydraulic Calculations and Annex B - Hydraulic Calculations
of the NFPA Standard
NFPA 15 - Standard for Water Spray Fixed systems For Fire Protection
Regards,
Ankur.
Following references may be utilized for fire water hydraulic calculations:
Chapter 7 - Design Objectives, Chapter 8 -Plans & Hydraulic Calculations and Annex B - Hydraulic Calculations
of the NFPA Standard
NFPA 15 - Standard for Water Spray Fixed systems For Fire Protection
Regards,
Ankur.
Similar Topics
![]() Is Emergency Venting Required For Polyethylene Storage Tank In Fire ScStarted by Guest_chem55_* , 01 Aug 2025 |
|
![]() |
||
Pem Water ElectrolysisStarted by Guest_tomr91_* , 29 Jul 2025 |
|
![]() |
||
![]() Heat Loss Calculation From Cylindrical Tan;Started by Guest_rasprocess2026_* , 23 Jul 2025 |
|
![]() |
||
![]() Relief Path To Be Considered For Inlet Pressure Drop CalculationStarted by Guest_Ascanio E._* , 09 Jul 2025 |
|
![]() |
||
![]() ![]() Nozzle Sizing CalculationStarted by Guest_BabRafiq1_* , 26 Aug 2022 |
|
![]() |