Forums
Blogs
Articles
File Library
FAQ
Search
FB
For pump, Design flow means Normal Flow.
Rated flow means Normal flow multiply by some factor.
That factor may be 1.1 / 1.2 / 1.3 depending on system.
1. Why we apply multiplication factor ?
2. Why different multiplication for different system ? i.e. for Feed/Product/Recycle it is 1.1 For Reflux it is 1.2 For BFW it is 1.3
|
|
Pump Rated Flow Margin
Started by PENGG, Dec 27 2012 10:26 AM
No replies to this topic
Share this topic:
Similar Topics
Thermal Oil Pump Motors Blew OffStarted by Guest_lizelle_* , 02 May 2025 |
|
|
||
Heat Exchanger Steam FlowStarted by Guest_aliebrahem17_* , 25 Nov 2024 |
|
|
||
Flow Through Normally No Flow LineStarted by Guest_iippure_* , 08 Apr 2025 |
|
|
||
Flare Header Reverse FlowStarted by Guest_Ahmadhamzahperta_* , 04 Apr 2025 |
|
|
||
Dynamic Simulation After Feed Flow ReductionStarted by Guest_Kakashi-01_* , 20 Mar 2025 |
|
|
