IS ANYBODY WHO KNOWS AVERAGE OVERALL HEAT-TRANSFER COEFFICIENT BETWEEN ASPHALT AND THERMAL OIL?
|
Overall Heat-transfer Coefficient
Started by Guest_MAREK_*, Feb 06 2006 09:44 AM
1 reply to this topic
Share this topic:
#1 Guest_MAREK_*
Posted 06 February 2006 - 09:44 AM
#2
Posted 06 February 2006 - 10:09 AM
Marek:
Your question is so general and lacking in detail that I can only furnish you a general response:
Use an overall "U" between 5 and 50 Btu/hr-ft2-oF when you are heating a very heavy petroleum fraction with a heating thermal fluid (HTF). In your case, I would use the value of 5 to 10.
Your question is so general and lacking in detail that I can only furnish you a general response:
Use an overall "U" between 5 and 50 Btu/hr-ft2-oF when you are heating a very heavy petroleum fraction with a heating thermal fluid (HTF). In your case, I would use the value of 5 to 10.
Similar Topics
Overall Heat Transfer CoefficientStarted by Guest_T_bag_* , 16 Apr 2024 |
|
|
||
Specific Heat DatabaseStarted by Guest_bckesim_* , 08 Apr 2024 |
|
|
||
Coefficient Of Conversion Of Electrical Energy Into Thermal Energy ForStarted by Guest_amx_* , 03 Apr 2024 |
|
|
||
Time Required To Heat Up A Fluid In A VesselStarted by Guest_panagiotis_* , 24 Jan 2023 |
|
|
||
Plate Fin Heat ExchangerStarted by Guest_shazzad1613_* , 23 Mar 2024 |
|
|