Jump to content



Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog

Liquefaction Of Natural Gas


This topic has been archived. This means that you cannot reply to this topic.
4 replies to this topic
Share this topic:
| More

#1 suresh2

suresh2

    Junior Member

  • Members
  • 24 posts

Posted 21 February 2006 - 12:58 PM

Dear All,

I am a chemical engineering Graduate at Texas A&M University Kingsville.

Currently working on my project " Liquefaction Of Natural Gas by C3MR process".

I got only 35% LNG.

I would appreciate your suggestions towards maximum product recovery.

I will explain about my process specifications to your fruitful replies.

Thanks a lot.

suresh

Edited by suresh2, 12 January 2010 - 10:27 PM.


#2 Art Montemayor

Art Montemayor

    Gold Member

  • Admin
  • 5,656 posts

Posted 11 May 2006 - 12:47 PM

Suresh:

Your project is interesting to me for various reasons. I'm an Aggie -Class '60 - and I worked for El Paso LNG company during the 70's when we were the pioneer and leading LNG company in the business. I fail to understand what you mean by "I got only 35% LNG". Do you mean you've run out of feed gas? Or do you mean you've run out of refrigeration? Either way, I would have to guess that you're simulating the process and perhaps you've got problems setting up your simulation input; is that it?

Perhaps if you tell us the whole story - basic data and explanation of the problem - we might be of help on the Forum.

#3 you

you

    Junior Member

  • Members
  • 19 posts

Posted 13 December 2006 - 11:26 PM

What I undestand from Suresh that he had a simulation and he found that the composition of methane in LNG is 35% using C3- MR cycle.

I think you have a problem with the composition of MR (C1, N2 ,C2 , C3) you have to use the right composition to get the right temperature at he exit of the main heat exchanger before going to the HP flash drum and LP flash drum and here you get LNG at -162C with almost of 85% methane liquid.

If you have another problem just give us more details as 'Art Montemayor' said.

#4 gvdlans

gvdlans

    Gold Member

  • ChE Plus Subscriber
  • 619 posts

Posted 15 December 2006 - 11:35 AM

I hope Suresh has finished the project by now, 10 months after posting this question...

#5 suresh2

suresh2

    Junior Member

  • Members
  • 24 posts

Posted 13 January 2008 - 01:47 PM

Dear Art,
I really appreciate your effort towards young engineers. I saw your reply to my question and i felt sorry about not replying. I was busy preparing for my graduation(held on 5 May, 06) and job search (joined job on May 15, 06). Infact, i learned so many things from your postings. Currently working as a Flow Assurance Consultant in Houston.

Again, Thanks for your help
Suresh




Similar Topics