A long plastic rod (k=0.4 Wm^-1K^-1,pC=1040 kJm^-3K^-1) has a diameter 1cm. It is uniformly preheated in an oven as preperation for a pressing operation.For best results the temeperature throughout the rod should not be less than 200C. To what uniform temperature should the rod be heated in the oven if, for the worst case, the rod sits on a conveyor for 3 minutes while exposed to convection cooling with ambient aisr at 25C, and a convection cooling coefficient of 10 Wm^-2K-1.
please if someone could help me out with this.anything would be helpful.Thanxxxxxxxxx
|
Heat Transfer
Started by Guest_faca_*, Mar 17 2006 11:33 PM
2 replies to this topic
Share this topic:
Similar Topics
Overall Heat Transfer CoefficientStarted by Guest_T_bag_* , 16 Apr 2024 |
|
|
||
Specific Heat DatabaseStarted by Guest_bckesim_* , 08 Apr 2024 |
|
|
||
Time Required To Heat Up A Fluid In A VesselStarted by Guest_panagiotis_* , 24 Jan 2023 |
|
|
||
Plate Fin Heat ExchangerStarted by Guest_shazzad1613_* , 23 Mar 2024 |
|
|
||
Heat Exchanger Temperature CrossStarted by Guest_kaidlut_* , 20 Dec 2022 |
|
|