2 replies to this topic

[Max Domingues]

Please, does anybody here works or have worked with a VRU system? Or, at least, have projected?

 

I would like to exchange information about this system with some of the following examples:

 

- Best vacuum pumps used;

- Determination of VOC header pressure;

- Switch between carbon filters premises;

- Blower vacuum adopted.

 

I am working on a VRU (using activated carbon filters) system and would be important if i could hear the experience of the others.

 

 

 

Thanks

 

Max

 

[spchauhan12]

Dear Max Domingues,

 

                         It ssems you are handling a project for Vapour Recovery Units (VRU) for recovery of medium to high concentrations of

 

volatile organic compounds from vapours.

 

For Vacuum system selection, you may refer below Link as a guide:

 

http://www.labconco....ght-vacuum-pump

 

Also there are several factors such as required Vacuum Level, Maintenance frequency, Cost etc.

 

 

Also, refer below link for your further guidance :

 

http://www.voczero.c...vapour-recovery

 

I will recommend you to make a simple Process data sheet for your VRU Package item & send it for Enquiry to some expert Vendor &

 

then you can analyse the things more clearly.

 

Hope this may help you.

 

Regards,

 

SPC

[ankur2061]

Max,

 

I am attaching some documents which may help you in approaching a vendor such as John Zink.

 

Regards,

Ankur

Attached Files

•  VRU_technical_requirements_EN.pdf   2.09MB   63 downloads
•  254624-400-DS-PRO-310, Rev F - Datasheet of VRU.pdf   407.31KB   49 downloads
•  John_Zink_Carbon_Adsorption_VRU.pdf   1.42MB   42 downloads