Jump to content



Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

3-Stage Propane Ref Performance

New Blog Entry

Steam Tracing Design- posted in Ankur's blog

3

Vapor Recovery Unit

vru vapor recovery voc

2 replies to this topic
Share this topic:
| More

#1 Max Domingues

Max Domingues

    Veteran Member

  • Members
  • 30 posts

Posted 14 June 2017 - 11:49 AM

Please, does anybody here works or have worked with a VRU system? Or, at least, have projected?

 

I would like to exchange information about this system with some of the following examples:

 

- Best vacuum pumps used;

- Determination of VOC header pressure;

- Switch between carbon filters premises;

- Blower vacuum adopted.

 

I am working on a VRU (using activated carbon filters) system and would be important if i could hear the experience of the others.

 

 

 

Thanks

 

Max

 



#2 spchauhan12

spchauhan12

    Veteran Member

  • Members
  • 42 posts

Posted 19 June 2017 - 01:27 AM

Dear Max Domingues,

 

                         It ssems you are handling a project for Vapour Recovery Units (VRU) for recovery of medium to high concentrations of

 

volatile organic compounds from vapours.

 

For Vacuum system selection, you may refer below Link as a guide:

 

http://www.labconco....ght-vacuum-pump

 

Also there are several factors such as required Vacuum Level, Maintenance frequency, Cost etc.

 

 

Also, refer below link for your further guidance :

 

http://www.voczero.c...vapour-recovery

 

I will recommend you to make a simple Process data sheet for your VRU Package item & send it for Enquiry to some expert Vendor &

 

then you can analyse the things more clearly.

 

Hope this may help you.

 

Regards,

 

SPC



#3 ankur2061

ankur2061

    Gold Member

  • Forum Moderator
  • 2,475 posts

Posted 19 June 2017 - 04:30 AM

Max,

 

I am attaching some documents which may help you in approaching a vendor such as John Zink.

 

Regards,

Ankur

Attached Files






Similar Topics