|
Water Hammer Calculation Methods
#1
Posted 08 February 2019 - 12:03 AM
#2
Posted 08 February 2019 - 03:55 PM
You probably should seek the services of a professional who can perform the analysis for you.
Bobby
#3
Posted 08 February 2019 - 07:53 PM
#4
Posted 09 February 2019 - 12:54 AM
Hi,
you may consider the link attached together with the videos.
https://www.fluidmec...water-hammer-2/
good luck , Bobby's advice is a good one .
Breizh
#5
Posted 09 March 2019 - 04:26 AM
There are software designed specifically for simulating hammer.
Examples are AFT Impulse, Bentley Hammer.
Calculating it by hand is tedious due to the iterations involved. That's why software are use to converge these calculations more easily.
The software allows you to simulate different valve closure times as well.
https://www.youtube....E4qwohQ&t=1380s
Edited by thorium90, 09 March 2019 - 04:26 AM.
#6
Posted 14 March 2019 - 12:44 AM
Hi,
you may consider the link attached together with the videos.
https://www.fluidmec...water-hammer-2/
good luck , Bobby's advice is a good one .
Breizh
Thanks a lot for sharing
Similar Topics
Chiller Efficiency Dependence On Cooling Water TemperatureStarted by Guest_Neha Vensiyani_* , 29 Apr 2024 |
|
|
||
Caloric Temperature CalculationStarted by Guest_bckesim_* , 10 Apr 2024 |
|
|
||
Waste WaterStarted by Guest_refluxraider_* , 14 Apr 2024 |
|
|
||
Water Seal DrumStarted by Guest_Ali4269278331_* , 05 Apr 2024 |
|
|
||
Falling Film Reactor Design CalculationStarted by Guest_Emranm02_* , 07 Apr 2024 |
|
|