I need paper published by Mr. Wing Wong in Chemical engineering related to flare and relief sytem.
|
Flare And Relief Papers Of Mr. Wing Wong
#1
Posted 24 March 2020 - 04:12 PM
#2
Posted 24 March 2020 - 11:08 PM
#3
Posted 25 March 2020 - 01:10 AM
In addition to the tube failure article linked above, there are a few notable papers from Wing Y. Wong in Chemical Engineering Magazine:
May 2000: Fires, Vessels and the Pressure Relief Valve
Oct. 1999: Improve the Fire Protection of Pressure Vessels
June 1992: Size Relief Valves more Accurately
May 1989: Safer Relief-Valve Sizing
#4
Posted 03 April 2020 - 01:48 PM
Hello.i have a question.in a ptoject some part of flare header is of mixed material.cs and ss
In ss tie ins are bascially from hcdp unit wheres tempersture ranges are below -50f
First 600 m is of ss.now client want me to tie in ss and tell him that till what length temperture shall be positive so that it doesnt effect it cs portion.
How i can check that till what length my negative temp -60f which i have tie in ss will be in positive temp so that it doesnt effect cs portion
Similar Topics
Handling The Limited Capacity Of Flare SystemStarted by Guest__1angelia23_* , 05 Apr 2024 |
|
|
||
Psv Fire Case Relief Load CalculationStarted by Guest_mahmooddalvi09_* , 21 Feb 2024 |
|
|
||
Back Pressure Of Elevated Flare Vs Ground FlareStarted by Guest_Sid__* , 04 Jan 2024 |
|
|
||
Floating Closed Drain Drum With FlareStarted by Guest_Falah_* , 26 Jan 2024 |
|
|
||
How To Choose Whether It Is Open Bonnet Or Closed Bonnet In Relief ValStarted by Guest_Radha Krishnan Siva Kumar_* , 02 Jan 2024 |
|
|