|


Barometric Leg
Started by john sam, Jun 25 2020 03:10 AM
3 replies to this topic
Share this topic:
#1
Posted 25 June 2020 - 03:10 AM
#2
Posted 25 June 2020 - 03:46 AM
Hi,
Consider this resource.
Pressure should be absolute and density is required .
ref: fig 1 of the document
Good luck
Breizh
Edited by breizh, 25 June 2020 - 03:52 AM.
#3
Posted 21 July 2020 - 07:18 AM
Why 45 or 90 degree bends are not allowed in barometric leg?
#4
Posted 21 July 2020 - 07:39 AM
Hi,
The answer is in the document attached !
Don't duplicate the posts , this is creating a mess .
Good luck.
Breizh
Edited by breizh, 21 July 2020 - 07:41 AM.
Similar Topics
![]() Barometric Legs Line SizingStarted by Guest_panoska_* , 17 Mar 2023 |
|
![]() |
||
![]() Barometric Condenser And Air Ejector TroubleshootingStarted by Guest_jordan1111_* , 04 May 2022 |
|
![]() |
||
![]() Barometric Condenser Hotwell Volume DesignStarted by Guest_zorro1234_* , 13 Jan 2022 |
|
![]() |
||
Barometric LegStarted by Guest_john sam_* , 25 Jun 2020 |
|
![]() |
||
![]() Vacuum Barometric Leg For Slurry DutyStarted by Guest_curious_cat_* , 11 Apr 2015 |
|
![]()
|