Jump to content

Featured Articles

Check out the latest featured articles.

File Library

Check out the latest downloads available in the File Library.

New Article

Product Viscosity vs. Shear

Featured File

Vertical Tank Selection

New Blog Entry

Low Flow in Pipes- posted in Ankur's blog


Different Fp In The Same Flowsheet - Hysys

hysys fluidpackage reforming

2 replies to this topic
Share this topic:
| More

#1 A_D_M_MII


    Junior Member

  • Members
  • 13 posts

Posted 11 March 2021 - 10:55 AM

Hi everyone,


I am simulating a methane steam reforming plant, but i have a question and i dont know if hysys has any tool to solve it.


I have two zones in my process:


1- Steam zone, it is necessary for my to use fluid package called ASME Steam.

2- And the zone where is the processed gas where i am using Peng Robinson.


The problem is about how can i inject steam from the zone one which is associated with de Fluid Package ASME into the second zone which is associated with Peng Robinson.


HYSYS doesn't allow me to conect two currents with diferent fluid package.


Is there any tool in order to solve this problem? 

I am new in the ¨hysys world¨, so i am learning step by step how to use this software.





Attached Files

#2 Said Salim

Said Salim

    Gold Member

  • Members
  • 79 posts

Posted 11 March 2021 - 08:45 PM

You can use stream cutter that will enable you to change fluid package from ASME steam to PR.

#3 SilverShaded


    Gold Member

  • Members
  • 51 posts

Posted 12 March 2021 - 07:32 AM

Hysys with Peng-Robinson automatically uses the steam stables if water is above a small percentage.

Similar Topics