|
0
Backpressure Control Valve Low Flow
Started by james.corrobro@gmail.com, Jun 27 2021 12:54 PM
2 replies to this topic
Share this topic:
#1
Posted 27 June 2021 - 12:54 PM
I have a backpressure control valve to maintain 100.psig on a separator
The normal flow is 10 mmscfd , max 12 mmscfd and min 2 mmscfd
However there is a case where I see 0.5 mmscfd flow
Should the Control Valve be sized for the range of 0.5 to 12 mmscfd ??
The normal flow is 10 mmscfd , max 12 mmscfd and min 2 mmscfd
However there is a case where I see 0.5 mmscfd flow
Should the Control Valve be sized for the range of 0.5 to 12 mmscfd ??
#2
Posted 27 June 2021 - 04:24 PM
Is this valve already in service?
Bobby
#3
Posted 28 June 2021 - 02:12 AM
I have a backpressure control valve to maintain 100.psig on a separator
The normal flow is 10 mmscfd , max 12 mmscfd and min 2 mmscfd
However there is a case where I see 0.5 mmscfd flow
Should the Control Valve be sized for the range of 0.5 to 12 mmscfd ??
Hi,
Then the minimum flow is 0.5 mmscfd and yes, the control valve should be sized for 0.5 to 12 mmscfd...
Similar Topics
Wafer Check ValveStarted by Guest_Ali4269278331_* , Yesterday, 01:31 PM |
|
|
||
Can Anyone Provide Me The Reference Datasheet For Deluge Valve?Started by Guest_Radha Krishnan Siva Kumar_* , 16 Apr 2024 |
|
|
||
Flow Switch High RangeStarted by Guest_Lyne_* , 11 Apr 2024 |
|
|
||
Hydrocarbon Dew Point Control UnitStarted by Guest_BabRafiq1_* , 05 Apr 2024 |
|
|
||
Valve Cv InputsStarted by Guest_QuantumEng_* , 01 Apr 2024 |
|
|