|
#1
Posted 17 October 2021 - 02:48 AM
I would like to ask you if you could share with me any document or information about steam drum sizing?
PS: I was searching in the Google. But, I didn't find something.
Thank you in advance!
#2
Posted 17 October 2021 - 02:57 AM
Hi,
Please clarify your need ! What is the purpose of this equipment?
Breizh
#3
Posted 17 October 2021 - 03:04 AM
I am asking this question, because I want to gain some knowledge on it.
#4
Posted 17 October 2021 - 03:23 AM
Hi,
Consider this link : Flash Separators, Condensate Handling, Flash Steam Recovery by Penn Separator
You may check on Spirax sarco website.
Good luck
Breizh
#5
Posted 17 October 2021 - 03:40 AM
#6
Posted 17 October 2021 - 05:45 AM
A drum to recover usable flash steam from steam condensate has different design criteria from a steam drum integral to a tubed boiler used in initial steam generation. A boiler steam drum is horizontal and elevated above the boiler tubes with very different-looking internals. You seem happy with the flash separator information provided, but know that there is a difference.
Edited by Pilesar, 17 October 2021 - 06:17 AM.
#7
Posted 20 October 2021 - 01:24 AM
Use API 12J for sizing the separator based on gravity separation.
Similar Topics
Flash Steam Vessel SizingStarted by Guest_JohnFields343_* , Yesterday, 12:03 PM |
|
|
||
Valves On Low Pressure Steam ServiceStarted by Guest_Ali4269278331_* , 15 Apr 2024 |
|
|
||
Design And Fabrication Of Reflux DrumStarted by Guest_Femi_* , 22 Apr 2024 |
|
|
||
Steam AccumulatorStarted by Guest_Valeriacortez11_* , 15 Apr 2024 |
|
|
||
Answered
Steam Pressure Requirements For Limpet Batch ReactorStarted by Guest_golegolegole_* , 10 Apr 2024 |
|
|