What's a common practise to drain and charge a close loop line.
For example a hot thermal oil line?
|
Posted 13 April 2022 - 06:27 AM
What's a common practise to drain and charge a close loop line.
For example a hot thermal oil line?
Posted 13 April 2022 - 06:48 AM
What's a common practise to drain and charge a close loop line.
For example a hot thermal oil line?
Hi,
The query isn't so clear...
But in general, draining a close loop is initiated by opening the high point vent and then opening the low point drain...
Charging included priming as much as possible and then getting the remain air out by opening the high point vent while the make up line is open...
Posted 13 April 2022 - 07:59 AM
Hi,
Before refilling the loop make sure it's clean ! you may have to use solvent to get rid of dirt, coke and other degradation products .
Let you consult your hot oil supplier .
Breizh
Closed Drain SystemStarted by Guest_Falah_* , 26 Mar 2024 |
|
|
||
Hot Oil Loop / Heating Medium DesignStarted by Guest_Lyne_* , 30 Mar 2024 |
|
|
||
Design Criteria For Sizing Sump Drum Of Close Drain System In Tank FarStarted by Guest_AnbIran_* , 28 Feb 2024 |
|
|
||
Fail Open And Fail Close Of Instrument Control ValvesStarted by Guest_panagiotis_* , 04 Feb 2024 |
|
|
||
Floating Closed Drain Drum With FlareStarted by Guest_Falah_* , 26 Jan 2024 |
|
|