Can anyone please explain me the nozzle sizing procedure for the Three phase separators ? Inlet and outlet (both liquid and gas outlet) nozzle sizing methods.
|
Nozzle Sizing In Separators
#1
Posted 30 May 2023 - 02:22 AM
#2
Posted 30 May 2023 - 11:21 AM
Search this forum and you will find lots of information.
Bobby
#3
Posted 09 June 2023 - 04:14 AM
Can anyone please explain me the nozzle sizing procedure for the Three phase separators ? Inlet and outlet (both liquid and gas outlet) nozzle sizing methods.
There are mechanical and process criteria to estimate the nozzle size, mechanical is reliability which allows higher momentum (RhoV2) however the process criteria is different which often takes into account the impact on expected separation e.g. feed nozzle size depend on what other internals are inside the vessel e.g. type of feed device, de-entrainment device etc.
Refer catalogues on vendor websites (Koch Glitsch or Sulzer) for criteria of nozzle momentum as a function of feed device type.
Similar Topics
Pump Sizing ConsiderationsStarted by Guest_panagiotis_* , 07 Apr 2024 |
|
|
||
Barometric Legs Line SizingStarted by Guest_panagiotis_* , 17 Mar 2023 |
|
|
||
Sizing Of Vertical/horizontal Flash DrumStarted by Guest_Mohammad3799_* , 10 Mar 2024 |
|
|
||
Design Criteria For Sizing Sump Drum Of Close Drain System In Tank FarStarted by Guest_AnbIran_* , 28 Feb 2024 |
|
|
||
Ro SizingStarted by Guest_T_bag_* , 27 Feb 2024 |
|
|