2 replies to this topic

[RaifOzturk]

Hello,

I am working on a jacket steam line changes. This jacket is already being used but due problems they having steam will be changed to more pressurized steam to increase holding temperature. They want to use already existing condensate lines including to ones to steam trap station.

I want to calculate if my lines from jacket outlet to steam traps are capable to deliver necessary condensate flow without steam locking or any other issues.

Due to height difference of lines and no space steam trap station is on the ground level  and horizontally placed.

Line is approximately 15 meters below with 20 meters length of piping from outlet of jacket.

Is there any references you could refer to me to check if line diameter is okay for new condensate flow.

Thanks in advance.

[breizh]

Hi, 

A few documents to support your work.

Good luck

Breizh

Attached Files

•  steam traps Armstrong.pdf   7.6MB   15 downloads
•  Steam trap sizing.pdf   1.78MB   22 downloads
•  Steam_Mains_Trap_Design_Guide.doc   252KB   9 downloads
•  Engineering Data Book-Spirax Sarco (2009).pdf   4.89MB   23 downloads
•  Condensate lines.pdf   70.54KB   21 downloads

[Pilesar]

Enough great info to help you is shown by Breizh! Here is another handy reference first shown me by Art Montemayor, who has taught me so much through his CheResources posts:  https://www.spiraxsa...te-return-lines

Edited by Pilesar, 06 January 2024 - 07:14 AM.